writer:點膠機廠家 Click:135

This paper introduces a technology of gluing the engine shell. This technology requires the use of high viscosity glue containing particles and filling the slot position, so that the glue can be evenly distributed to the position of the filling slot. As a.

writer:點膠機廠家 Click:200

Plastic glue is mostly used in the adhesion and bonding stage between plastics. In order to achieve the required strength and quality, plastic glue will be used as the adhesive. This time, we will explain the matters needing attention of plastic glue for .

writer:點膠機廠家 Click:206

Plastic glue is mostly used in the adhesion and bonding stage between plastics. In order to achieve the required strength and quality, plastic glue will be used as the adhesive. This time, we will explain the matters needing attention of plastic glue for .

writer:點膠機廠家 Click:135

When it comes to high viscosity glue, we will naturally think of silica gel. The advantages of high viscosity silica gel are mainly reflected in the bonding strength and application range. The stability of the glue is also highly concerned. This kind of g.

writer:點膠機廠家 Click:140

Some time ago, the issue of smart phone dispensing has started to cause controversy. To distinguish whether a mobile phone has undergone dispensing treatment needs to be disassembled to observe the SOC (system level chip). If it has been glued and disasse.

writer:點膠機廠家 Click:138

Customers who often use dispenser must have an understanding of the operation performance and advantages of the equipment. This time, we will introduce the principle and application of glue bonding. Glue is a curing agent that can bond two different objec.

writer:點膠機廠家 Click:130

What we are talking about here is only limited to the small metal adhesive plastics. The special fixed fixture and dispensing equipment are used for joint operation. Because AB glue is used for bonding, this glue has the corresponding acid and alkali resi.

writer:點膠機廠家 Click:163

Most of the plastic products in our life are made of PP (polypropylene) as the raw material. There are some differences between the glue used for bonding PP plastics and the way of dispensing. If the equipment is selected, it can be put into production an.

writer:點膠機廠家 Click:198

304 stainless steel is a common material. This link is about the problems and needs in the bonding stage of stainless steel strips. The metal products factory has several detailed production requirements for this link. The selection of glue should be the .

writer:點膠機廠家 Click:174

For bonding copper sheet or two copper materials, the proportioned AB glue can be used. After bonding with copper, AB glue has good resistance to acid, alkali and water vapor erosion. In addition, it has high bonding strength and stability. Therefore, it .

writer:點膠機廠家 Click:178

You have been familiar with PCB (printed circuit board) as a component. The introduction of Chinese system automation is related to PCB reinforcement technology, mainly for computer connector and metal connector, select appropriate UV glue to reinforce PC.

writer:點膠機廠家 Click:177

Wooden packaging board is often referred to as density board. Generally, it is made of good quality wood board by edge sealing. In the whole process, the packaging board needs to be glued and controlled within a reasonable range. The two sides of the pack.

writer:點膠機廠家 Click:194

This time, we want to focus on the safety of the hot melt adhesive machine. This equipment is used to control the storage of high temperature hot melt adhesive and carry out the application of dispensing or gluing. The formal operation involves safety iss.

writer:點膠機廠家 Click:110

The reason why users choose the automatic dispensing machine is its intelligence, convenience, stability and rapidity. The problem of glue flow control lies in the obstacle before realizing the precise gluing effect. As we all know, most of the dispensing.

writer:點膠機廠家 Click:250

Glue on tempered film Even if the whole process of using glue on the dispenser is strictly carried out according to the operation specifications, there will still be many situations, for example, the glue used drips on the substrate carelessly, or the nee.

writer:點膠機廠家 Click:108

We all know that automatic glue sprayer is a kind of high-grade automatic technology equipment. Can Its used in many fields, so many manufacturers cant do without it. They always have several sets, which can help us to complete tasks faster, enhance work .

writer:點膠機廠家 Click:121

The products used in dispensing machine include mobile phone protective shell, mobile phone hanging, anti-static wrist strap and anti-static wrist band. The application of dispensing machine has reached the continuous operation of automatic production lin.

writer:點膠機廠家 Click:125

Due to the communication progress of electronic computer and information technology, the consumption of sensors increases rapidly, which becomes more critical in electronic products such as mobile phones. Most of the distance sensors used in electronic pr.